AppGini Community Forums

Hi,

When attempting to upgrade an AppGini project from 5.20 to 5.97 revision 1142 I get the following error:
Run-time error '5': Invalid procedure call or argument.
See attached screenshot.

Is there a workaround I could try to resolve this error?

Thanks for your help!

-David

Just updating this thread as per my conversation with David via email. Turns out this happened when the AXP project file was loaded from a NAS (network-attached storage). When loaded from the local hard drive, the error disappeared. So, I'll try to investigate this issue further and make necessary fixes in future releases.